Things to Do When You Have a Leaking Water Heater

Typically, if you take excellent care of it, a regular water heater will last around 7 up to 13 years, whether it is electric or gas.

However, even if you maintain it properly, there is always a possibility that it can leak. Fortunately, almost every small water heater leak can be fixed easily.

Before you contact Hamilton Plumbers for Hire, there are some things you could do to make it simpler.

Reasons for the Leak

• Broken Pressure or Temperature Valves

These valves, as the name implies, track and control the pressure and temperature inside a water heater. They could cause water leaks from the water tank’s sides whenever they break.

• Water Line Connections That are Loose

Regular use can loosen the outlet or inlet water lines. This could result in leaks. Typically, this issue can be repaired by replacing or tightening the worn and loose water lines.

• Corrosions

The buildup of sediment can cause holes, cracking, and corrosion in the tank’s bottom. Typically, it is time to replace your water heater whenever this occurs.

• Damaged Drain Valves

Damaged drain valves could result in water leaks from the tank’s bottom. Luckily, you can simply repair it by replacing the damaged drain valve.

There are obviously other aspects that can cause leaks in your water heater. The leaks are often caused by several problems. The ideal method to know what’s causing the water heater leak and get the perfect solution for repairing it is by calling an expert.

Things to Do When You Have A Leaking Water Heater

Here are several steps that you can take if you have a leaking water heater:

• Turn Off the Power

Whenever you find a leak in your water heater, first of all, you’ve got to cut off the power.

• Electric Water Heater – First, locate the breaker panel of your house and look for the breaker marked “water heater.” To cut the power to your system, you should turn it off.
• Gas Water Heater – Look for the thermostat. You will notice a small knob with 3 options – Pilot, off, and on. To turn the gas off, switch the knob to Pilot or off. This will make your heater safe to work on.
• Turn the Water Source Off

Look for the line for the cold water that leads to your water heater and turn it off. The line should have a valve. You can turn it clockwise to close it. This would cut the water supply off and enable you to do the next stage.

• Get Rid of the Water Inside the Tank

The most vital step is to drain your water heater if you’ve got a regular water heater tank.

• First, look for the drain valve and attach a hose to it.
• Place the hose to a sump pit or floor drain.
• Turn on the valve after placing the hose.

Keep in mind that you might see the water either does not flow extremely well your does not flow at all. If that’s the case, you have to turn on any hot water faucet in the house.